Electric Cell : Properties | Types

What is Electric Cell?

Ans: An electric cell (or electrochemical cell) is a device that converts chemical energy (or light/thermal energy) into electrical energy. It acts as a source of direct current (DC) by maintaining a steady potential difference across a closed circuit.

1. Electrical properties of a Cell:

The electric cell have three fundamental electrical properties :

i) Electromotive Force (EMF, $E$): The work done by source in taking a unit charge once round the complete circuit.

$E= \frac{W}{q}$

ii) Terminal Voltage ($V$): The actual potential difference across the cell's terminals when it supplies current $I$ to an external load resistance $R$ (closed circuit).

iii) Internal Resistance ($r$): The property of electrolyte and electrodes in cell that oppose the flow of current.

Discharging Equation: When a cell supplies current $I$ to an external circuit:

$V = E - I r$

Charging Equation: When an external source charges the cell:

$V = E + I r$

2. Types of Cells

Cells are classified based on their underlying mechanism, chemical reversibility, and application.

A. Primary Cells (Non-Rechargeable): In primary cells, the internal chemical reaction is irreversible. Once the active chemical reactants are consumed, the cell can no longer generate electricity.

Working Principle: Direct conversion of chemical energy into electrical energy via non-reversible redox reactions.

Characteristics: High energy density, low initial cost, lightweight, but cannot be recharged.

Examples:

Simple Voltaic Cell: Copper anode (+) and Zinc cathode (-) in dilute sulfuric acid (${H}_2S{O}_4$).

Daniell Cell: Copper in $CuSO_4$ solution and Zinc in $ZnSO_4$ solution separated by a porous pot or salt bridge.

Dry Cell (Leclanché Cell): Zinc container (-) with a central carbon rod (+) surrounded by manganese dioxide ($MnO_2$) and ammonium chloride ($NH_4\Cl$) paste. Used in remotes and clocks.

B. Secondary Cells (Rechargeable / Accumulators): In secondary cells, the chemical reaction is reversible. Applying an external electrical current forces the reaction in reverse, restoring the chemical state (charging).

Working Principle: Reversible energy conversion (Electrical $\rightarrow$ Chemical during charging; Chemical $\rightarrow$ Electrical during discharging).

Characteristics: Reusable for hundreds to thousands of cycles, lower internal resistance, capable of supplying high currents.

Examples:

Lead-Acid Accumulator:It is used in automobiles (like in heavy motor vehicle) and home for backup power (inverters).

Lithium-Ion (Li-ion) Cell:It is used in smartphones, laptops, and electric vehicles (EVs).

Nickel-Cadmium (NiCd) & NiMH Cells:It is used in low power and rechargeable AA/AAA batteries (It is made up of standard dry cell ).

C. Fuel Cells: Fuel cells continuously convert the chemical energy of a fuel supplied from an external tank (such as hydrogen) and an oxidant (oxygen) directly into electricity.

Working Principle: Continuous supply of fuel $\rightarrow$ continuous electric current and water byproduct.

Characteristics: High operating efficiency ($\approx 60-70\%$), zero greenhouse gas emissions.

D. Photovoltaic (Solar) Cells: Unlike electrochemical cells, solar cells convert light energy (photons) directly into electrical energy via the photovoltaic effect in semiconductor $p-n$ junctions (typically silicon), without relying on chemical reactions.

Read More

Description of the units and scale of energy

Description:

---

Unit of Energy

The SI unit of energy is the Joule (J), named after the English physicist James Prescott Joule.

1 Joule is defined as the work done when a force of one Newton is applied to an object and the object is displaced by 1 metre in the direction of the applied force:

$1 J = 1 N·m = 1 kg·m^{2}·s^{-2}$

---

Other Common Units of Energy

Unit	Symbol	Equivalent in Joules	Used In
Electronvolt	eV	$1.6 × 10^{-19} J$	Atomic & nuclear physics
Calorie	cal	$4.184 J$	Thermodynamics, food
Kilocalorie	kcal	$4184 J$	Nutrition
Kilowatt-hour	kWh	$3.6 × 10^{6} J$	Electrical energy
Erg	erg	$10^{-7} J$	CGS system
British Thermal Unit	BTU	$1055 J$	Engineering (UK/US)

---

Scale of Energy — From Smallest to Largest

Scale	Energy (Joules)	Example
$10^{-34} J$	Quantum scale	Energy of a photon of a radio wave
$10^{-19} J$	Atomic scale	1 electronvolt (ionisation energy)
$10^{-18} J$	Molecular scale	Energy of a chemical bond
$10^{-3} J$	Millijoule	Energy in SHM of a spring (small oscillation)
$1 J$	Joule	KE of a 1 kg mass moving at √2 m/s
$10^{3} J$	Kilojoule	Energy in a food biscuit
$10^{6} J$	Megajoule	Energy of a 1-tonne car at 160 km/h
$10^{9} J$	Gigajoule	Daily energy use of a household
$10^{15} J$	Petajoule	Energy released by a small nuclear bomb
$10^{22} J$	Astronomical scale	Kinetic energy of Earth's rotation
$10^{41} J$	Stellar scale	Energy released by a supernova explosion

---

• 
  

Read More

Gaussian Surface and its Properties

Gaussian Surface and its Properties:

The Gaussian surface is a hypothetical or imaginary closed three-dimensional surface. This surface is used to calculate the electric flux through a vector field (i.e. gravitational field, electric field, or magnetic field).

Examples:

Gaussian surfaces are surfaces of spheres, cylinders, cubes, etc. There are some surfaces which cannot be used as Gaussian surfaces like the surface of disc, square etc.

Essential properties of Gaussian surface are :

1. The Gaussian surface must be closed surface to clearly define the regions, inside, on, and outside the surface.

2. A Gaussian surface is constructed to pass through the point at which the electric field is being calculated.

3. The shape of the Gaussian surface depends upon the shape or symmetry of the charge distribution (i.e. the source).

4. For systems with discrete charges, the surface should not intersect any point charge, as the electric field is undefined at the location of a point charge. However, the surface can intersect continuous charge distributions

5. The electric flux through the surface depends solely on the total charge enclosed within it, not on the external charges.

6. The electric field at any point on the Gaussian surface is influenced by both internal and external charges.

7.If the electric flux is zero through the surface, it does not necessarily mean the electric field is zero. However, if the electric field is zero at every point on the surface then the electric flux will be definitely zero.

8. If a closed surface encloses no net charge, the total electric flux through it will be zero—regardless of whether the external electric field is uniform or varying.

Read More

Population of energy level and it thermal equilibrium condition

Population of energy level:

The number of atoms per unit volume in any energy level is called the population of that energy level.

The population $N$ of any energy level $E$ depends on the temperature $T$ which can be described by

$N=e^{-\left(\frac{E}{kT}\right)}$

Where $k \rightarrow$ Boltzmann's Constant

The above equation is called the Boltzmann equation.

Population of energy level at thermal equilibrium condition:

At thermal equilibrium, the number of atoms (Population) at each energy level decreases exponentially with increasing energy level, as shown in the figure below.

Let us consider, two energy levels $E_{1}$ and $E_{2}$. The population of these energy levels can be calculated by

$N_{1}=e^{\left(-\frac{E_{1}}{kT} \right)} \quad (1)$

$N_{2}=e^{\left(-\frac{E_{2}}{kT} \right)} \quad (2)$

The ratio of the population in these two levels is called the relative population.

$\frac{N_{2}}{N_{1}}= \frac{e^{\left(-\frac{E_{2}}{kT} \right)}}{e^{\left(-\frac{E_{1}}{kT} \right)}}$

$\frac{N_{2}}{N_{1}}= e^{\left(-\frac{(E_{2}-E_{1})}{kT} \right)} $

$\frac{N_{2}}{N_{1}}= e^{-\frac{\Delta E}{kT} } $

This equation is known as Boltzmann's distribution. The above equation suggests the relative population is dependent on two factors.

1.) The energy difference $(\Delta E)$

2.) The absolute temperature $T$

Read More

Ferromagnetic Substances and Its Properties

Description:

The atoms of these materials like paramagnetic material have permanent magnetic dipole moments. The similar natures of dipoles are grouped in a small region called domain. These domains have a net magnetic moment in a particular direction. In the material, there are a large number of domains having magnetic moments in different directions making the net magnetic moment of the entire material zero. When the external magnetic field is applied to such ferromagnetic materials, then either the domains are oriented in such a way as to align with the direction of the field, or the size of the favorable domain increases. Generally, in the strong applied field the domains are aligned and in the weak field the size of the favorable domain increases. In both cases, the material is strongly magnetized in the direction of the applied external magnetic field.

Properties of Ferromagnetic Substances:

The properties of ferromagnetic substances are similar to the properties of diamagnetic substances but the difference is that diamagnetic substances are weakly magneties and ferromagnetic substances strongly magenties in the presence of magnetic field.

Properties of Ferromagnetism:

1.) If these materials are placed in an external magnetic field, they are strongly magnetized in the direction of the applied external magnetic field.

2.) Due to unpaired electrons, the atoms of ferromagnetic materials have a net magnetic dipole moment.

3.) Ferromagnetism arises due to the formation of domains.

4.) Magnetic susceptibility of these materials is high and positive and also inversely proportional to the absolute temperature:

$\chi=\frac{C}{T-T_{c}}$

where $T_{c}$ is Curie temperature.

5.) Relative permeability of these materials is much greater than 1.

6.) Magnetic moment is high but along the direction of the applied magnetic field.

7.) $Fe$, $Ni$, $Co$, etc. are examples of paramagnetic materials.

Read More

High Monochromaticity of Laser Light

High Monochromaticity:

A laser beam is highly monochromatic. The monochromaticity of the laser beam is much more than that of any traditional monochromatic source. The line spread of a laser beam is very small in comparison to the light from a traditional source. This difference arises because conventional sources emit wave trains of very short duration and length, whereas, laser emit continuous waves of very long duration. The random spontaneous emission in the laser cavity is one of the mechanisms that determine a laser's ultimate spectral line width. It should be noted that no light source including laser light source, is perfectly monochromatic but a better approximation to the ideal condition may be considered in the case of the laser beam. The spread of light from a normal monochromatic source range over a wavelength of the order of $100 -1000 \overset{\circ}{A}$ while in lasers it is of the order of few angstroms $(\lt 10 \overset{\circ}{A})$ only.

The high spectral purity of laser radıation leads directly to applications in basic scientific research including photochemistry, luminescence excitation spectroscopy absorption, Raman spectroscopy, and also in communication. The degree of non-monochromaticity $\xi$ of light is characterized by the spread in frequency of a line by the line width $\Delta \nu $ and is expressed as:

$\xi=\frac{\Delta \nu}{ \nu_{\circ}}$

where $\nu_{\circ}$ is the central frequency. If $\Delta \nu $ approaches zero the degree of non-monochromaticity tends to zero which is an ideal condition. Absolute monochromaticity $(\Delta \nu =0)$ is not attainable in practice even with laser light. The spreads of two light sources, laser light, and normal light, are shown in the figure above. The degree of non-monochromaticity may also be written in terms of coherence time $(\tau_{C})$ or coherence length $(L_{C})$ as follows:

$\xi=\frac{1}{\tau_{C} \: \nu_{\circ}}$

$\xi=\frac{c}{L_{C} \: \nu_{\circ}}$

This relation shows that the monochromaticity will be large for higher values of coherence time or coherence length. The bandwidth of a laser light from a high-quality He-Ne gas laser is of the order of $500Hz$ $(\Delta \nu =500 Hz)$ corresponding to coherence length of the order of $600 km$ $(\tau_{C} = 2 \times l0^{-3} sec)$.

Read More

Conversion of Galvanometer into a Voltmeter

What is a voltmeter?

A voltmeter is an instrument used to measure potential differences between two points in an electric circuit directly in volts. The instrument measuring the potential difference of the order of millivolt $(mV)$ is called a millivoltmeter. An ideal voltmeter has infinite resistance.

Galvanometer used as voltmeter:

To use the galvanometer as a voltmeter in the circuit, The resistance of the galvanometer should be very high or almost infinite as compared to the other resistance of the circuit. Because the internal resistance of an ideal voltmeter is infinity.

So a high resistance is connected in series with the galvanometer (pivoted-type moving-coil galvanometer).

When a high resistance is connected in series to the galvanometer then the resultant resistance increases as compared to the other resistance of the circuit and it can be easily used as an ammeter and the actual potential difference can be measured through it.

Mathematical Analysis:

Let us consider, $G$ is the resistance of the coil of the Galvanometer, and the $i_{g}$ current, passing through it, produces full-scale deflection. If $V$ is the maximum potential difference that exists between two points $a$ and $b$ in the circuit. On connecting the galvanometer across the points $a$ and $b$, a current $i_{g}$ passes through the galvanometer and a high resistance $R$ is connected in series with galvanometer then

$i_{g}= \frac{V}{G + R}$

$G + R= \frac{V}{i_{g}}$

$R= \left(\frac{V}{i_{g}}\right ) - G$

If the current $i_{g}$ in the coil produces a full-scale deflection, then for the potential difference $V$ between the points $a$ and $b$, there will be a full scale deflection. Thus, on connecting a resistance $R$ of the above valve in series with the galvanometer, the galvanometer will become a voltmeter of range $0$ to $V$ Volt.

Note:

For the voltmeter, a high resistance is connected in series with the galvanometer and so the resistance of a voltmeter is very high compared to that of a galvanometer.

Resistance of voltmeter

$R_{v}=R+G$

Read More

Light Detection And Ranging (LIDAR)

LIDAR (Light Detection And Ranging):

The laser system used for monitoring the environment is known as LIDAR. LIDAR is an acronym that stands for "Light Detection And Ranging".

Before the discovery of the laser, the study of the atmosphere was carried out using an optical beam, the source being the search light. One such experiment was performed by Hulbert in 1937 to study the turbidity of the atmosphere. After the discovery of the laser as a source of an optical highly coherent beam, the study of the atmosphere was revolutionised.

A pulsed laser beam is transmitted into the atmosphere. It is scattered by the particles present in the atmosphere. The scattered radiations are picked up by a receiver. The receiver removes the background sunlight by using different filters. The scattered light gives information regarding the particles present in the atmosphere. Although microwaves can also give these characteristics, the results from laser beams are better in resolution and clarity. The different particles present in the atmosphere in colloidal form can be studied by a LIDAR. A schematic diagram of such a setup is shown in the Figure Below.

A photo detector is used to measure the time dependence of the intensity of the back-scattered laser beam. The time variation can be easily converted into the height (range) from which the laser beam has been back scattered the figure below shows a plot of time dependence of back scattered laser beam, which corresponds to height in the case of clear atmosphere with no aerosols, i.e., back scattering is by pure molecular gases such as $N_{2}$, $O_{2}$, $Ar$ etc. These molecules have dimensions much smaller than optical wavelength.

The scattering is of Rayleigh type. The figure below shows a plot of time dependence of backscattered light in the atmosphere contained aerosols (colloidal particles). These particles have dimensions comparable with the wavelength of laser light. This is Mie scattering. The curve in the figure below has kinks at points A and B between heights h and h. These kinks are due to the fact that between points $A$ and $B$, there are aerosols that are responsible for a greater intensity than that for a clear atmosphere. This implies the presence of aerosols between heights $h_{1}$ and $h_{2}$. With LIDAR, it is also possible to study the concentration and sizes of the aerosols present in the atmosphere. These are very important in atmospheric pollution studies.

Read More

Comparison between electric charge and mass

Electric Charge:

1.) An electric charge can be positive, negative, or neutral.

2.) The electric charge of a body is always quantized and follows the equation: $q=ne$

3.) The electric charge of a body remains unaffected by its speed.

4.) Charge is strictly conserved.

5.) Electrostatic forces between two charged bodies can be either attractive or repulsive.

6.) Electrostatic forces between multiple charges can sometimes cancel each other out.

7.) A charged body always carries some mass.

Mass:

1.) The mass of a body is always positive.

2.) Unlike charge, mass quantization has not yet been established.

3.) The mass of a body increases with its speed.

4.) Mass is not conserved by itself as some of the mass may get changed into energy or vice versa.

5.) Gravitational forces between two masses are always attractive.

6.) Gravitational forces between multiple bodies never completely cancel out.

7.) A body with mass may not necessarily have a net charge.

Read More

Weak nuclear force or interaction and its properties

What is weak nuclear force? 

Weak nuclear force is an act between only elementary particles involved in the nuclear process of $\beta$ - decay. The $\beta$ decay are two types

1.) Beta Pluse Decay
2.) Beta Minus Decay

1.) Beta Plus Decay:

When a beta plus decay occurs, a proton converts into a neutron and releases a positron $\&$ an electron-neutrino. It also reduces one atomic number of an element and converts it into another element.

2.) Beta Minus Decay:

When a beta minus decay occurs, a neutrons convert into a proton and releases an electron $\&$ electron-antineutrino. It also increases one atomic number of an element and converts it into another element.

In addition to beta decay, some scientists also find many other types of weak force like "charged-current" or "neutral-current". The charge is required for "charged-curent" but not for "neutral-current"; because of that, there are two types of charged carriers: one is the $W$ boson charge carrier and $Z$ boson.

Important properties of weak nuclear force :

1. Any process involving neutrino and antineutrino is governed by weak nuclear force because these particles can experience only weak interaction and not strong nuclear interaction.

2. The strength of weak nuclear force is greater than gravitational force and less than electromagnetic force.

3. It operates only in the range of nuclear size ($ \approx 10^{-15} m$).

4. The messenger particles that transmit the weak nuclear force between elementary particles are the massive vector bosons ($W^{\pm}, Z^{\circ}$).

5. The decay of in weak nuclear force (e.g., the decay of a pion to a muon and a neutrino) is much slower than the decay caused by strong nuclear or electromagnetic forces.

Read More